New Products terial to the chamber. Meanwhile, the Edge VS420 is a high-capacity, high-torque twin shaft shredder that is ideal for the processing of a large array of materials including green waste, MSW, C&D waste, biomass and end-of-life tyres. www.edgeinnovate.com ent models to match the machines’ output to specific project requirements, delivering greater flexibility and reducing the total cost of equipment ownership. The VFD control will be available via a simple dial or remote control on three of the company’s DustBoss models: the DB-30, DB-45 and DB-60. All three use specialized nozzles and a ducted fan design to at-omize the water flow into droplets 50-200 microns in size, which is the optimum for most dust control applications. Matching the droplets to the most com-mon particle sizes delivers the greatest opportunity for them to collide and fall to the ground. www.bosstek.com EDGE INNOVATE TO DEBUT NEW HIGH-CAPACITY WASTE SHREDDERS BOSSTEK INTRODUCES OPTIONAL VFD SYSTEM TO ADJUST AIR FLOW Edge Innovate is set to debut two new high-capac-ity waste shredders at CONEXPO 2020 in March: the VS420 and HS750. The Edge HS750 offers operators a high-capacity, horizontal, slow-speed shredder that combines impressive throughput, the ability to withstand difficult-to-shred materials and superior resistance to non-shreddables. A 42-inch diameter compression top feed roll aids in the delivery of material to a 42-inch tip diameter solid steel downturn rotor which has been designed to absorb heavy impacts and deliver high throughput. Potential for rotor overload or material bridging is reduced via an intelligent material management system that ensures the efficient delivery of ma-NEW CUT-TO-LENGTH CONVEYOR BELT CLEANER HELPS REDUCE INVENTORY In a move designed to bring unparalleled versatility to its line-up of dust suppression equipment, Boss-Tek has introduced an optional Variable Frequency Drive (VFD) system that allows users to adjust air flow to suit a broader range of applications and working environments. Driven by customer input from a number of different industries, the new VFD system reduces the need to purchase or rent differ-A new conveyor belt cleaner has been designed with an innovative method of holding the ure-thane blade in place without the need to mill any slots for holding pins. The QC1+ Belt Cleaner from Martin Engineering can be cut to length to fit virtually any application, reducing the need for customers to stock multiple blade sizes to FUEL | AIR | GAS | ASH www.processbarron.com | 205-663-5330 | 2770 Welborn Street Pelham, AL 35124 28 Canadian BIOMASS CB_Process Barron _Winter20_CSA.indd 1 WINTER 2020 2020-01-28 2:34 PM
Canadian Biomass Winter 2020: Page 28
