BANDIT BUILDS YOUR BOTTOM LINE Model 2400XP INTRODUCING THE MODEL 2400XP For Pulp and Paper Markets Based on Bandit’s popular Model 2400 disc design, the 2400XP features additional knife coverage, a new chipping angle and other hardware enhancements to produce a 5/8”-7/8” with a chip thickness ideal for pulp and paper mills. Whole Tree Chipper See how Bandit ® equipment can build your bottom line. Contact Bandit at 800-952-0178 or visit online at Produce 35-Ton Loads in 15 Minutes This 24” capacity chipper with Bandit’s proven slide box feed system aggressively pulls and crushes whole trees into the chipper and is positioned within inches of the chipper disc increasing chip uniformity while reducing oversize chips and fines. The 2400XP features Bandit’s clean feed system that limits the discharge of chips under the feed system. • A dirt separator is provided to remove dirt and twigs. • The dirt separator can be closed when the chipper is used to produce fuel chips. • A 765 hp diesel provides plenty of power to produce 15 minute chip loads and fully pack 50 ft trailers. WWW.BANDITCHIPPERS.COM www.banditchippers.com | 1.800.952.0178 This chipper is ideally suited to chip trees coming from a flail debarker.
Canadian Biomass July August 2016: Page 28
