JEFFREY RADER SCHUTTE-BUFFALO www.hammermills.com The Schutte-Buffalo Ham-mermill Series 15 Hammer Mill is an efficient, high pro-duction fine grinder. Built specifically for the wood waste market it can pro-cess chips, shavings, bark, hogged scrap and other ma-terials to the exact finished particle size required for downstream processing. Schutte-Buffalo has over 80 years of experience building fine grinding hammer mills. JIANGSU ZHENGCHANG www.terrasource.com TerraSource Glob-al’s Jeffrey Rader brand offers a wide range of hammer-mills including FT and FTE Flextooth Crushers for larger products and Mini-Mill E, 30ABE, and 34ABE models for smaller products and sampling. “E” designations in each model signify the brand’s ex-clusive E-Z Access technology, which allows safe, fast, and easy access to hammers, rotors, and liners. All models are equipped with heavy-duty rotors that can be set up with three, four or six rows of hammers. JIANGSU YONGLI www.zhengchang.com The SFSP60 series hammermill features two types of hammers for equal wear and tear. The SFSP60 has improved design of base frame with good rigidity and little vibration. The inner grinder is studded with wearing plate for long useful life. With the welded structure, the motor and the mill rotor are installed on the same base with direct-drive, compact structure, allowing you to change the sieve plate conveniently and quickly. The operation door is fitted with a safety interlock device, and the rotor checkout uses dynamic balance for minimum vibration. www.yongli-machine.com The YHM68 Series Hammermill features a Siemens motor and SKF bearing. A U-shape grinding groove at the bottom of the grinding chamber can improve grinding efficiency 50 to 80 per cent. The feeding inlet is made at the side of the device to make feeding easy. The shell is welded together with steel plates for durability throughout the hammermill. The motor and rotor are installed in the same heavy-duty base using a coupling direct drive system. The rotor uses dynamic balance and has the ability to work in both forward and reverse. Efficient drying of biomass Stela low temperature belt dryer • 9 4 years of history, 4 6 years of experience in manufactoring drying plants • more than 450 belt dryers in more than 60 countries all over the world in the most various sizes • lowest emissions rates, energy-saving air technology • dryers for produ c tion capactiy of 5.500.000 t/a pellets supplied • no need of wet electrostaticfilters (WESP) to achieve low emisson values Stela Laxhuber GmbH Öttingerstr. 2 D-84323 Massing Tel. +49 8724/899-0 E-Mail: [email protected] www.drier.com Canadian BIOMASS CBM_MarApr16_HoffmannAiroflex_CSA.indd 1 2016-03-07 7:29 AM CBM_MarApr16_Stela_CSA.indd 1 23 2016-03-08 9:04 AM
Canadian Biomass March April 2016: Page 23
