New Gear with speeds up to 700 fpm (3.5 m/sec) and belts lengths of more than 50 feet (15.2 m). Typically 48 inches (1220 mm) long, the units are also avail-able in custom sizes for special applications. The belt glides over low friction 62 durometer (shore D) UHMW polyethylene sidebars featur-ing the company’s unique “box” design and low drive-power consumption. They display minimal heat buildup during operation and can handle service temperatures of -20° to 140°F (-29° to 60°C). The shape allows operators to turn the bars over for a second service life without disassembly of cradle components. Manufactured to accommo-date belt width sizes of 36 inches (915 mm) for single bar models and 42-60 inches (1066-1524 mm) for double bar designs, operators simply pull the cradle away from the frame to perform main-tenance on idlers and sidebars. It can be ordered to suit any CEMA standard trough angle. system represents the industry’s only nitrogen oxides (NOx) and particulate matter (PM) ret-rofit emission control device to be commercially available to the non-road market. Nett Technol-ogies’ BlueMAX PLUS 100 SCR system has been designed to reduce nitrogen oxides (NOx) and particulate matter (PM) by a minimum of 85% from medium and heavy-duty non-road diesel engines ranging between 75 and 560 kW (100-750 hp). In addition to removing NOx and PM, the system also has the added benefit of reduc-ing carbon monoxide (CO) emissions by 95% and hydrocarbons (HC) by 60%. This product is well suited for known PM2.5 and ozone nonat-tainment areas where controlling both PM and NOx are key factors towards adopting appro-priate State Implementation Plans (SIPs) under the Clean Air Act. The BlueMAX PLUS 100 system consists of a passive diesel particulate filter fol-lowed by a urea SCR system. “The BlueMAX PLUS 100 is a great retrofit emission control solution for non-road engines certified to Tier 1, 2 or 3 emission standards. The system is a durable and versatile emission control solution that extends the years of usage of existing construction and MARTIN CONVEYOR SYSTEM REDUCES WEAR Martin Engineering has introduced two conveyor system components designed to mitigate expen-sive spillage and belt wear issues at material transfer points. The EVO Slider Cradle and the Martin Slider Cradle both support the belt and pre-vent spillage due to belt edge sag. Located under the skirt board in the chute box after the impact cradle, the units utilize “double-life” slider bars, which offer a superior seal with low friction. The result is a flat and stable belt surface throughout the settling zone, reducing fugitive material and extending belt health. The Martin Engineering slider cradles are designed for conveyor systems NETT TECH VERIFIED BY EPA Nett Technologies Inc. of Mississauga, Ont. has received verification of its BlueMAX PLUS 100 SCR system by the U.S. Environmental Protec-tion Agency (EPA). The BlueMAX PLUS 100 SCR Our experience makes all the difference We have an experienced team at every stage of a project. We provide design, manufacturing, installation for all your dust collection and air conveying needs. air Filtration pellets plants ProduCts › air pulse › silo › industrial duct › abort gate › screw and belt conveyor › air density separator ✓ Our prOducts are designed and manufactured tO the highest standards in regards tO market specificatiOns. dust collector › Cyclone › Multicyclone › Fan › rotary air lock 1890, 1 st Street, Industrial Center St-Romuald, Quebec G6W 5M6 Tel.: 418 839-0400 Fax: 418 839-0201 www.rodriguemetal.com JANUARY/FEBRUARY 2015 28 Canadian BIOMASS
Canadian Biomass January-February 2015: Page 28
