Canadian Biomass • Spring 2022 • Heating Yellowknife

As more communities become aware of the benefits of using biomass to heat and power their buildings, more district energy systems are coming online in Canada. Northern, remote areas in particular have recognized the opportunity to use bioenergy to reduce their reliance on fossil fuels and lower their greenhouse gas (GHG) emissions.

J&R Mechanical, a plumbing and heating contractor in Yellowknife, N.W.T., is one of the companies leading the charge. Last year, they began operating a new $1.1-million district energy system, called the Woolgar District Heating System, to provide heat to a government of N.W.T. (GNWT) warehouse and three other private businesses, helping to reduce the government’s reliance on fossil fuels.

This is not the first time that J&R Mechanical has installed a district energy system. According to owner Ken Miller, the company, which was founded in 1977, has been installing biomass boilers for over 12 years. When these types of boilers started becoming popular in the N.W.T., the territorial government embraced the potential environmental benefits of using wood pellets instead of fossil fuels.

Consequently, “our government contracts were specifying installations with biomass – in schools predominantly, at first – and that’s how we got involved in biomass,” Miller says. “In the years after that, when tenders would come out for different systems, we focused on that as part of our regular scope of plumbing and heating. The heating became biomass, and we became a prominent installer of biomass boilers for the government and the private sector.”

Around the same time, J&R Mechanical began installing district heating systems for different government clients. Their first system was for an Indigenous government client in Behchok , N.W.T., installing a plant that provides heat to eight buildings from one biomass boiler.

“As we continued to do more and more of those, we had this opportunity to propose a project that was literally right in our backyard – the Woolgar District Heating System – and the main client is the GNWT warehouse,” Milller says. “They have a list of buildings they wanted to switch to biomass, and this one was on their list.”

The territorial government agreed to their proposal to switch the warehouse over to a district heating system. J&R Mechanical also approached other businesses in the area that could benefit from the system, which led to 30 per cent of the block coming on board.

The project took two years from proposing the idea to completion, including the planning and design, permits and installation. J&R Mechanical ran into a few issues during the construction and installation process, mainly permitting issues, Miller says.

“You can only dig in the summer here, so we started the project too late to get everything – the permits and all of that – on time in the previous summer (2019),” he explains. “Even into the construction season, in the summer of 2020, we were delayed because of permits. We didn’t have everything in place. So, it took us into the winter, which caused some issues for us and left us with some seasonal deficiencies.”

But, the system officially came online in March 2021, and has since been providing heat to the three businesses, the GNWT warehouse and a GNWT data centre that is connected to the warehouse.

The system itself is fairly simple, with two main components: a container with a 390-kW Viessmann Vitoflex 300-UF boiler, supplied by Enderby, B.C.-based Fink Machine, and a silo to store the wood pellets that the boiler burns.

Fink Machine assembled the boiler in a containerized plant, which was then shipped to J&R Mechanical, who installed it and connected it to their own systems. Meanwhile, the wood pellets came from a pellet plant in Alberta.

According to Miller, the system is very similar to any other hydronic heating system: “you heat water and you transfer the heat to buildings through various different types of heat exchangers, whether it be baseboard radiation or unit heaters, radiant in-floor heaters, radiant panel heating.

“The process of burning wood pellets to create the heat source is the only real difference,” he continues. “We unload and load them, redistribute them to different silos in the community where these pellets are then extracted by augers or different devices to feed the boiler, based on the demand for heat.”

The boiler produces heat, water vapour, carbon dioxide and ash. The heat from the water vapour is transferred to each building’s space heating system through underground pipes, Miller explains.

Yellowknife, of course, is an extremely cold area in the winter, which means the system has to be able to operate in a harsh climate. So far, there have been no issues with the boiler, Miller says.

“The average design temperature here is to -45 C; we’ve seen the boiler operate just perfectly in those temperatures,” he says. “It’s operating as it was designed to operate, with low maintenance and fairly high efficiencies. It’s worked out well.”

The system has also had a big impact on the N.W.T. government’s fossil fuel use, as it has cut oil use for the warehouse by 92 per cent – from 60,000 litres per year to just 4,800 litres. The system has also reduced the warehouse’s GHG emissions by 145 tonnes of carbon equivalent.

The project, which cost $1.1 million, was a big capital investment for J&R Mechanical. The N.W.T. government gave J&R Mechanical a $274,000 grant for the project, but the company footed the rest of the bill. However, Miller says their business plan calls for paying off that investment in four to five years.

So far, the feedback from the community and the territorial government has been very positive, Miller says. He believes there are opportunities for other northern communities to develop similar district energy systems to reduce their reliance on fossil fuels.

“I think everyone is looking at them as a better solution – looking at biomass boilers to heat buildings – so I think it has been kind of proven that this is a good way to go,” he says.

Nevertheless, there are a few barriers to overcome when installing a system like this. One such challenge is understanding the potential impact on a community’s infrastructure.

“We bury pipes in the ground, and that can be very disruptive,” Miller explains. “There’s other stuff in the ground that you don’t see – power lines, water and sewer pipes, telephone lines and things like that, depending on where you’re trying to install it. So, engineering design can be a bigger challenge.”

However, the benefits far outweigh the costs, and J&R Mechanical is looking at possibly expanding the Woolgar District Heating System.

“If our client base grows – and it potentially will with some new developments next year or the year after – we possibly will have to expand the size of the heating plant to accommodate,” he says.

For now, though, the company is planning to add one or two more buildings to the system and continue running it as is.